Image: u/delphiki_ on Reddit
A 2014 Harman Kardon AVR 161 amplifier's firmware patched for Home Assistant
An owner patched the amp's firmware so it reports its state, takes exact volume levels, switches straight to Bluetooth and stays reachable when off; the work was done with Claude and tested on one amp.
Credits
Earliest dated source:
The full story
A 2014 Harman Kardon AVR 161 amplifier still sounded fine but was nearly useless in Home Assistant. Commands over its network interface were sent blind with no state reported back, volume only went up or down one step, and Bluetooth could only be chosen with the front-panel buttons. Claude's first search for undocumented endpoints found nothing.
So the owner patched the amp's firmware with Claude. It now reports its state and pushes changes itself, accepts an exact volume, switches straight to Bluetooth and surround modes, and stays reachable on the network when off so Home Assistant can turn it on. A custom integration, installable through HACS, exposes it as a proper media player. The owner calls it entirely vibe-coded and has tested it on one amp only, their own.
How it was done
Tools
Themes
Loading themes…
Sources
From a short post by the maker, so the details are as they tell them.
- Reddit: Taking back control of my ampReddit poster: delphiki_Posted
The owner's post in r/homeassistant summarising what the firmware patch does.
- The project: blog.ju.wtf
The owner's blog post telling the story of reverse engineering and patching the amp's firmware.